Ferrari 512 BB LM

Ferrari 512 BB LM

In 1978, Ferrari began producing a purpose-built competition version of the BB 512, termed the 512 BB LM (also styled 512 BB/LM or 512 BBLM). They were produced in two series, with the first series constructed in 1978 and the second series constructed between late 1978 and 1982.

Ferrari constructed three examples of the series one 512 BB LM in 1978. These had wider wheel arches, a roof-mounted aerofoil, and a rear wing adapted from the front wing of a Ferrari 312T2. Two of these cars were fitted with “long nose” bodywork, which extended the front of the car by several inches and replaced the standard full-width grill with a small oval air inlet. Power from the flat-12 was increased to approximately 400-440 bhp, while the cars’ weight was decreased to approximately 1,200 kg (2,646 lb).

The three factory S1 BB LMs competed in the 1978 24 Hours of Le Mans, with two cars entered by Ferrari importer Charles Pozzi and one car entered by NART. Jacques Swaters’ Ecurie Francorchamps entered one additional 512 BB, which was converted to competition specification by the team. This car differed from the factory BB LM cars, weighing approximately 100 kg (220 lb) more. None of these cars finished the race due to mechanical issues.

After the failure of the first series, Ferrari worked on fixing the BB LM with a second development program in late 1978. The flat-12’s carburetors were replaced with a Lucas mechanical fuel injection system to increase power to approximately 470-480 bhp. The transmission and cooling system were improved to handle the additional power. The production-based bodywork of the first BB LMs was replaced by a new design developed by Pininfarina which carried over very little of the original styling. The bodywork was now 16 in (41 cm) longer and 6 in (15 cm) wider, increasing overall weight compared to the S1 by 30 kg (66 lb). The pop-up headlights were now replaced by fixed units integrated into the fascia, while the tail was lengthened to the maximum allowed by regulations. Wider wheels were equipped, measuring 10in wide at the front and 13 in wide at the rear. Brakes and suspension were also improved. Nine of these S2 BB LMs were built by Ferrari in 1979.

Technical Specification

Brand : BBR
Size : 1/18
Limited :

Power : 464 hp, 451 N⋅m
Engine : 5.0 L, V12
Transmission : 5-speed manual

0 - 100 km : 4,9 sec
Top Speed : 320 km/h
Rpm : 4600 rpm / 451 N⋅m

Predecessor : ()
Production : 1978 - 1982
Quantity : 25 units

Length : 4,895 mm
Width : 1,830 mm
Height : 1,120 mm

Wheelbase : 2,500 mm
Curb weight - 1050 kg
Assembly - Maranello, Italy